Splitvolt Wall Charging Station

– For Commercial Installers & Managed Deployments

The Splitvolt Level 2 Wall Charger is a versatile AC | EV eletric charging solution designed for businesses where efficiency and reliability matter most. The charger features plug-and-play installation via a NEMA 14-50 outlet or hardwired configurations up to 50A, allowing businesses to scale charging infrastructure quickly and cost-effectively

Highlights:

• Plug-and-play via NEMA 14-50 outlet
• Up to 12kW Level-2 charging (50A hardwired)
• Charging speeds up to 12–15× faster than a standard 120V outlet
• 37–45 miles of range per hour depending on installation configuration
• Power sharing across chargers on the same circuit
• Adjustable current from 8A–50A for load balancing
• NEMA 3S weather-resistant design for indoor/outdoor installation
• Operates from -31°F to 131°F
• SAE J1772 connector for most EVs
• Tesla compatible via adapter

Commercial EV Charging Features for Fleet, Workplace, and Managed Charging Installations

Important:
The capabilities described on this page are intended only for commercial EV charging deployments such as fleet installations, workplace charging, multi-unit properties, and other professionally managed charging environments.

These features are not used in standard residential installations and may require special configuration, additional hardware components, or commercial installation procedures performed by qualified EV infrastructure installers.

Many of these capabilities are not enabled in residential installations and are designed specifically for managed charging environments using commercial charging network platforms.

Commercial installers, infrastructure developers, and fleet operators should contact Splitvolt directly for deployment guidance, configuration options, and applicable part numbers.

Commercial EV Charging Platform Capabilities

OCPP Network Integration for Managed Charging

OCPP-compatible EV charging station designed for integration with commercial charging management platforms
Enables fleet charging management, billing, access control, and usage reporting
Supports integration with third-party EV charging network providers
Ideal for fleet depots, workplace charging networks, and commercial infrastructure deployments

Commercial Connectivity & Network Options

Supports multiple communication methods required for commercial charging infrastructure:

Ethernet (LAN) connectivity for reliable commercial network installations

Wi-Fi connectivity where wired networking is not available
Optional LTE / cellular connectivity for remote charging sites
Bluetooth commissioning interface for installer setup and diagnostics

These connectivity options allow chargers to operate within managed charging networks, fleet energy management systems, and commercial EV infrastructure platforms.

Installer Commissioning & Local Web Management

(Web UI)

The charger includes an embedded web-based management interface designed for installer configuration and commercial infrastructure management.

Capabilities include:

Local browser-based configuration via Web UI interface
Setup of network settings, charging parameters, and system configuration
Commissioning and diagnostic tools for infrastructure installers
Verification of charger status during installation and deployment

This interface is intended for commercial EV infrastructure installations and is typically not used in residential consumer deployments.

Dynamic Load Management for Multi-Charger Installations

Supports advanced load management required for commercial charging deployments:

Dynamic Load Balancing automatically distributes available electrical capacity across multiple chargers
Static Load Management for predictable power allocation in fleet and workplace installations
Helps reduce electrical panel upgrades and utility infrastructure costs
Enables scalable EV charging deployments within existing electrical capacity

This capability is particularly valuable for fleet depots, workplace charging programs, commercial parking facilities, and multi-tenant properties.

Multi-Charger Infrastructure Deployment

The Splitvolt Wall Charging Station platform is designed to support multi-charger installations operating within shared electrical infrastructure.

Benefits include:

Efficient deployment across fleet depots and commercial charging facilities
Support for workplace charging networks
Infrastructure support for multi-tenant residential buildings
Optimized use of existing electrical service capacity

Fleet Access Control & Authentication

Supports access control features required for commercial charging environments:

RFID authentication capability
Supports fleet-only access or managed user groups
Enables integration with charging network access management systems
Allows tracking of charging sessions and user activity

Remote Monitoring & Infrastructure Management

Network connectivity enables operators to manage charging infrastructure remotely:

Remote diagnostics and charger monitoring
Firmware updates and system configuration
Reduced need for on-site service visits
Improved operational efficiency for fleet and commercial charging networks

Commercial-Grade Hardware Platform

The Splitvolt Wall Charging Station is engineered for reliable operation in commercial environments:

Compact wall-mounted EV charging station design
Suitable for parking structures, garages, and commercial installations

Simplified installation for commercial electricians and EV infrastructure installersAdjustable charging current to match site electrical capacity

Designed for continuous commercial operation

Typical Commercial EV Charging Applications

The Splitvolt Wall Charging Station supports a wide range of commercial EV charging deployments, including:

Fleet depotsWorkplace charging programsMulti-tenant residential buildingsCommercial parking facilitiesRetail and hospitality charging locations

Municipal and government EV charging deployments

Commercial Deployment Inquiries

Commercial EV charging deployments often require site-specific planning, infrastructure design, and charger configuration.

Fleet operators, commercial property owners, EV infrastructure developers, and qualified installers should contact Splitvolt directly for deployment guidance, configuration options, and applicable part numbers.

For additional information, quotes or RFP responses please contact us at help@splitvolt.com or Chat with us ↪ 🗨️